PartsTable
Technical Data Sheet
Download PDF

6H-24 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6H-24: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN, material_thickness: 0.060 INCHES NOMINAL IN, loop_inside_diameter: 1.000 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 1.812 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 1.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-110-1818, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6H-24
NSN: 5340-01-110-1818
FSC: 5340 — Hardware, Commercial
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.812 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.312 INCHES NOMINAL IN
NSN5340-01-110-1818
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6H-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.812 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.312 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.531 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.812 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.312 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6H-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6H-24?
6H-24 is a CLAMP,LOOP.
What is the NSN for 6H-24?
6H-24 is cataloged in the U.S. Government catalog under NSN 5340-01-110-1818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6H-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.