PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6GP80-3 PIECE 11
6GP80-3 PIECE 11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, peripheral_diameter: 0.750 INCHES NOMINAL IN, center_hole_diameter: 0.500 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-067-3633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6GP80-3 PIECE 11
NSN: 5330-01-067-3633
FSC: 5330
CAGE: 32142 — HYDRASEARCH COMPANY, LLC (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
peripheral_diameter0.750 INCHES NOMINAL IN
center_hole_diameter0.500 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-01-067-3633
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6GP80-3 PIECE 11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
CENTER HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: U
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
CENTER HOLE DIAMETER0.500 INCHES NOMINAL IN
PERIPHERAL DIAMETER0.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
D15-437EPC135Interchangeable
interchangeable cross-reference
interchangeable
D15-613EPC135Interchangeable
interchangeable cross-reference
interchangeable
45043Interchangeable
interchangeable cross-reference
interchangeable
1412588-40Interchangeable
interchangeable cross-reference
interchangeable
45-043-40Interchangeable
interchangeable cross-reference
interchangeable
6L3942-5-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6GP80-3 PIECE 11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6GP80-3 PIECE 11?
6GP80-3 PIECE 11 is a PACKING,PREFORMED.
What parts can replace 6GP80-3 PIECE 11?
There are 17 known substitutes for 6GP80-3 PIECE 11: D15-437EPC135, D15-613EPC135, 45043 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6GP80-3 PIECE 11?
6GP80-3 PIECE 11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-067-3633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6GP80-3 PIECE 11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026