PartsTable
Technical Data Sheet
Download PDF

6F4715 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6F4715: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1026 OVERALL, nut_style: ROUND, nut_diameter: 5.328 INCHES MINIMUM AND 5.422 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.688 INCHES NOMINAL IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-274-4709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6F4715
NSN: 5310-00-274-4709
FSC: 5310 — Nuts and Washers
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP 1026 OVERALL
nut_styleROUND
nut_diameter5.328 INCHES MINIMUM AND 5.422 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.688 INCHES NOMINAL IN
thread_seriesUN
thread_directionRIGHT-HAND
drive_point_depth0.266 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
drive_point_width0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
small_end_diameter4.557 INCHES MINIMUM AND 4.562 INCHES MAXIMUM IN
undercut_thickness0.156 INCHES NOMINAL IN
nominal_thread_size3.750 INCHES IN
NSN5310-00-274-4709
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6F4715 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
DRIVE POINT WIDTH: 0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.750 INCHES IN
•
NUT DIAMETER: 5.328 INCHES MINIMUM AND 5.422 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.266 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
UNDERCUT THICKNESS: 0.156 INCHES NOMINAL IN
•
NUT THICKNESS: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
DRIVE POINT WIDTH0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.750 INCHES IN
NUT DIAMETER5.328 INCHES MINIMUM AND 5.422 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.266 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
UNDERCUT THICKNESS0.156 INCHES NOMINAL IN
NUT THICKNESS0.688 INCHES NOMINAL IN
SMALL END DIAMETER4.557 INCHES MINIMUM AND 4.562 INCHES MAXIMUM IN
DRIVE POINT QUANTITY6
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6F4715?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6F4715?
6F4715 is a NUT,PLAIN,ROUND.
What is the NSN for 6F4715?
6F4715 is cataloged in the U.S. Government catalog under NSN 5310-00-274-4709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6F4715