PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6E-05
6E-05 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-022-0351, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6E-05
NSN: 5310-01-022-0351
FSC: 5310
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
material_thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
NSN5310-01-022-0351
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6E-05 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
11-3706-11Interchangeable
interchangeable cross-reference
interchangeable
003274Interchangeable
interchangeable cross-reference
interchangeable
CWPTB6Interchangeable
interchangeable cross-reference
interchangeable
A-3874Interchangeable
interchangeable cross-reference
interchangeable
13030298Interchangeable
interchangeable cross-reference
interchangeable
NF21698Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6E-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6E-05?
6E-05 is a WASHER,LOCK.
What parts can replace 6E-05?
There are 6 known substitutes for 6E-05: 11-3706-11, 003274, CWPTB6 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6E-05?
6E-05 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-022-0351. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6E-05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026