PartsTable
Technical Data Sheet
Download PDF

6D40-1073 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6D40-1073: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, aperture_width: 4.437 INCHES NOMINAL IN, aperture_length: 6.187 INCHES NOMINAL IN, style_designator: OVAL, lubrication_method: IMPREGNATED, lubrication_material: GRAPHITE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-110-4009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6D40-1073
NSN: 5330-00-110-4009
FSC: 5330 — Packing and Gasket Materials
CAGE: 10855 — CARRIER CORP (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
aperture_width4.437 INCHES NOMINAL IN
aperture_length6.187 INCHES NOMINAL IN
style_designatorOVAL
lubrication_methodIMPREGNATED
lubrication_materialGRAPHITE OVERALL
bearing_surface_width0.187 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-110-4009
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6D40-1073 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GRAPHITE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
LUBRICATION METHOD: IMPREGNATED
•
STYLE DESIGNATOR: OVAL
•
BEARING SURFACE WIDTH: 0.187 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 4.437 INCHES NOMINAL IN
•
APERTURE LENGTH: 6.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGRAPHITE OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
LUBRICATION METHODIMPREGNATED
STYLE DESIGNATOROVAL
BEARING SURFACE WIDTH0.187 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE WIDTH4.437 INCHES NOMINAL IN
APERTURE LENGTH6.187 INCHES NOMINAL IN
MATERIALCELLULOSE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
6D43-1073Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6D40-1073?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6D40-1073?
6D40-1073 is a GASKET.
What parts can replace 6D40-1073?
There is 1 known substitute for 6D40-1073: 6D43-1073. Substitute compatibility should be verified for your specific system.
What is the NSN for 6D40-1073?
6D40-1073 is cataloged in the U.S. Government catalog under NSN 5330-00-110-4009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6D40-1073

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.