PartsTable
Technical Data Sheet
6C ✓ Verified by PartsTable
· TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The STARTER,ENGINE,ELECTRICAL is a the manufacturer industrial component. Key specifications include phase: THREE, diameter: 0.062 INCHES NOMINAL IN, key_type: PUSH BUTTON, material: STEEL, base_type: SWIVEL, tube_type: RECTIFIER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6C
NSN: 3110-00-155-9113
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
phaseTHREE
diameter0.062 INCHES NOMINAL IN
key_typePUSH BUTTON
materialSTEEL
base_typeSWIVEL
tube_typeRECTIFIER
vise_typeAUTOMATIC
base_styleTELEPHONE SLIDE NUMBER THREE
bulb_styleT (TUBULAR)
seat_angle37.0 DEGREES
column_typeSINGLE
design_typeMECHANICAL
NSN3110-00-155-9113
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OVERALL OUTSIDE DIAMETER: 1.4658 INCHES MINIMUM AND 1.4718 INCHES MAXIMUM IN
ALIGNMENT TYPE: RIGID
STYLE DESIGNATOR: FLAT RACE SURFACE, IN LINE BALL RETAINER
BORE SMALLEST DIAMETER: 0.8125 INCHES MINIMUM AND 0.8175 INCHES MAXIMUM IN
MATERIAL: STEEL BALL
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.4658 INCHES MINIMUM AND 1.4718 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
STYLE DESIGNATORFLAT RACE SURFACE, IN LINE BALL RETAINER
BORE SMALLEST DIAMETER0.8125 INCHES MINIMUM AND 0.8175 INCHES MAXIMUM IN
OVERALL HEIGHT0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
MATERIALSTEEL BALL
MATERIALSTEEL WASHER
SURFACE FINISHGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6CInterchangeable
interchangeable cross-reference
interchangeable
E1Interchangeable
interchangeable cross-reference
interchangeable
6C-1Interchangeable
interchangeable cross-reference
interchangeable
MILE1Interchangeable
interchangeable cross-reference
interchangeable
GGG-V-410Interchangeable
interchangeable cross-reference
interchangeable
GGG-V-410 TY4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6C?
6C is a STARTER,ENGINE,ELECTRICAL.
What parts can replace 6C?
There are 14 known substitutes for 6C: 6C, E1, 6C-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6C?
6C is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6C