PartsTable
Technical Data Sheet
Download PDF

699-12 — InLine F-Plug connector for Coax Cable with Cable sheath 7mm

✓ Government record, cited
Esselte · MRO · MRO_GENERAL
PRODUCT OVERVIEW

699-12: InLine F-Plug connector for Coax Cable with Cable sheath 7mm.

F connector for coaxial cable for connectorizing, outer cable diameter max. 8.2mm. Key specifications include end_item_identification: 4935-01-012-9486; TEST KIT,UNIVERSAL; 10177632.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-847-2733, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 699-12
NSN: 5310-00-847-2733
NIINs: 008472733, 011047337, 013056839
FSC: 5310 — Nuts and Washers
CAGE: 09386 — ALLIEDSIGNAL INC ALLIEDSIGNAL BRAKING SYSTEMS-WHEEL END PRODUCTS (USA)
SPECIFICATIONS
end_item_identification4935-01-012-9486; TEST KIT,UNIVERSAL; 10177632
NSN5310-00-847-2733
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 699-12 · Esselte ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 1.460 INCHES MINIMUM AND 1.495 INCHES MAXIMUM IN
•
THREAD SERIES: UN
•
WASHER THICKNESS: 0.109 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.125 INCHES IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.014 INCHES NOMINAL IN
WASHER OUTSIDE DIAMETER1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
WIDTH ACROSS FLATS1.460 INCHES MINIMUM AND 1.495 INCHES MAXIMUM IN
THREAD SERIESUN
WASHER THICKNESS0.109 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.125 INCHES IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 1
5310008472733Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 699-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 699-12?
699-12 is a InLine F-Plug connector for Coax Cable with Cable sheath 7mm manufactured by Esselte. It is classified as a MRO (MRO_GENERAL).
What parts can replace 699-12?
There is 1 known substitute for 699-12: 5310008472733. Substitute compatibility should be verified for your specific system.
What is the NSN for 699-12?
699-12 is cataloged in the U.S. Government catalog under NSN 5310-00-847-2733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 699-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.