PartsTable
Technical Data Sheet
Download PDF

6980823 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6980823: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include body_width: 0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN, leaf_width: 1.37 INCHES MINIMUM AND 1.43 INCHES MAXIMUM IN, knuckle_type: FRICTION, style_designator: PLATE, surface_treatment: UNABLE TO DECODE, end_item_identification: LSMU MK 203 M. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-619-7228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6980823
NSN: 5340-01-619-7228
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
body_width0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN
leaf_width1.37 INCHES MINIMUM AND 1.43 INCHES MAXIMUM IN
knuckle_typeFRICTION
style_designatorPLATE
surface_treatmentUNABLE TO DECODE
end_item_identificationLSMU MK 203 M
knuckle_inside_diameter0.518 INCHES MINIMUM AND 0.528 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyHINGE,BUTT
NSN5340-01-619-7228
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6980823 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE INSIDE DIAMETER: 0.518 INCHES MINIMUM AND 0.528 INCHES MAXIMUM IN
•
BODY WIDTH: 0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PLATE
•
LEAF WIDTH: 1.37 INCHES MINIMUM AND 1.43 INCHES MAXIMUM IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
KNUCKLE TYPE: FRICTION
TECHNICAL CHARACTERISTICS
KNUCKLE INSIDE DIAMETER0.518 INCHES MINIMUM AND 0.528 INCHES MAXIMUM IN
BODY WIDTH0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN
STYLE DESIGNATORPLATE
LEAF WIDTH1.37 INCHES MINIMUM AND 1.43 INCHES MAXIMUM IN
SURFACE TREATMENTUNABLE TO DECODE
PART NAME ASSIGNED BY CONTROLLING AGENCYHINGE,BUTT
END ITEM IDENTIFICATIONLSMU MK 203 M
KNUCKLE TYPEFRICTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6980823?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6980823?
6980823 is a HINGE,BUTT.
What is the NSN for 6980823?
6980823 is cataloged in the U.S. Government catalog under NSN 5340-01-619-7228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6980823