PartsTable
Technical Data Sheet
Download PDF

69790400392 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

69790400392: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, cross-sectional_height: 0.719 INCHES NOMINAL IN, cross_section_inside_diameter: 9.500 INCHES NOMINAL IN, cross_section_outside_diameter: 10.938 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-455-9729, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69790400392
NSN: 5330-00-455-9729
FSC: 5330 — Packing and Gasket Materials
CAGE: 75665 — LOVEJOY, LLC DIV LOVEJOY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
cross-sectional_height0.719 INCHES NOMINAL IN
cross_section_inside_diameter9.500 INCHES NOMINAL IN
cross_section_outside_diameter10.938 INCHES NOMINAL IN
NSN5330-00-455-9729
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69790400392 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.719 INCHES NOMINAL IN
•
CROSS SECTION INSIDE DIAMETER: 9.500 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 10.938 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.719 INCHES NOMINAL IN
CROSS SECTION INSIDE DIAMETER9.500 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER10.938 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
00392Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C6SEALReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 69790400392?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69790400392?
69790400392 is a PACKING,PREFORMED.
What parts can replace 69790400392?
There are 2 known substitutes for 69790400392: 00392, C6SEAL. Substitute compatibility should be verified for your specific system.
What is the NSN for 69790400392?
69790400392 is cataloged in the U.S. Government catalog under NSN 5330-00-455-9729. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69790400392