PartsTable
Technical Data Sheet
Download PDF

69767 — PIPE,BENT,METALLIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

69767: PIPE,BENT,METALLIC.

The PIPE,BENT,METALLIC is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, aperture_diameter: 4.281 INCHES NOMINAL IN, bolt_circle_diameter: 5.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.016 INCHES NOMINAL IN, side_radius_from_gasket_center: 2.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-594-5084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69767
NSN: 5330-00-594-5084
NIINs: 005945084, 013737656
FSC: 5330 — Packing and Gasket Materials
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
aperture_diameter4.281 INCHES NOMINAL IN
bolt_circle_diameter5.000 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
side_radius_from_gasket_center2.750 INCHES NOMINAL IN
NSN5330-00-594-5084
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69767 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 2.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.281 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 5.000 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER2.750 INCHES NOMINAL IN
APERTURE DIAMETER4.281 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER5.000 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
2808B886Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 69767?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69767?
69767 is a PIPE,BENT,METALLIC.
What parts can replace 69767?
There is 1 known substitute for 69767: 2808B886. Substitute compatibility should be verified for your specific system.
What is the NSN for 69767?
69767 is cataloged in the U.S. Government catalog under NSN 5330-00-594-5084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69767