PartsTable
Technical Data Sheet
Download PDF

697331 — RESISTOR,ADJUSTABLE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

697331: RESISTOR,ADJUSTABLE.

The RESISTOR,ADJUSTABLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, body_length: 2.000 INCHES NOMINAL IN, body_diameter: 0.560 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED, first_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-148-1218, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 697331
NSN: 5340-00-148-1218
NIINs: 001481218, 003751239
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
body_length2.000 INCHES NOMINAL IN
body_diameter0.560 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE AND TAPERED
first_leg_width2.010 INCHES NOMINAL IN
terminal_length0.440 INCHES NOMINAL IN
first_leg_length0.729 INCHES MINIMUM AND 0.771 INCHES MAXIMUM IN
second_leg_styleEND RADIUS AND TAPERED
second_leg_width1.506 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
NSN5340-00-148-1218
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 697331 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.199 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.506 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.139 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.199 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
SECOND LEG WIDTH1.506 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
SECOND LEG LENGTH1.139 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 697331?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 697331?
697331 is a RESISTOR,ADJUSTABLE. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 697331?
697331 is cataloged in the U.S. Government catalog under NSN 5340-00-148-1218. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 697331

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.