PartsTable
Technical Data Sheet
Download PDF

696D — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

696D: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OR STEEL COMP 1020 OVERALL, hole_type: DRILLED, head_style: SQUARE, head_height: 0.156 INCHES NOMINAL IN, point_style: CHAMFER DOG, point_length: 0.219 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-752-1058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
696D
NSN: 5305-00-752-1058
FSC: 5305 — Screws
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 OR STEEL COMP 1020 OVERALL
hole_typeDRILLED
head_styleSQUARE
head_height0.156 INCHES NOMINAL IN
point_styleCHAMFER DOG
point_length0.219 INCHES NOMINAL IN
thread_class3A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length0.313 INCHES MINIMUM IN
point_diameter0.312 INCHES NOMINAL IN
fastener_length0.594 INCHES NOMINAL IN
NSN5305-00-752-1058
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 696D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT DIAMETER: 0.312 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.156 INCHES NOMINAL IN
•
POINT LENGTH: 0.219 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.594 INCHES NOMINAL IN
•
THREAD LENGTH: 0.313 INCHES MINIMUM IN
•
HOLE CONFIGURATION STYLE: SQUARE LONGITUDINAL HOLE
•
POINT CHAMFER ANGLE: 30.0 DEGREES NOMINAL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS
POINT DIAMETER0.312 INCHES NOMINAL IN
HEAD HEIGHT0.156 INCHES NOMINAL IN
POINT LENGTH0.219 INCHES NOMINAL IN
FASTENER LENGTH0.594 INCHES NOMINAL IN
THREAD LENGTH0.313 INCHES MINIMUM IN
HOLE CONFIGURATION STYLESQUARE LONGITUDINAL HOLE
POINT CHAMFER ANGLE30.0 DEGREES NOMINAL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLESQUARE
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
12621RReference document
Same NSN cross-reference
Reference document — Secondary reference
914114Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305007521058Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 696D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 696D?
696D is a SETSCREW.
What parts can replace 696D?
There are 3 known substitutes for 696D: 12621R, 914114, 5305007521058. Substitute compatibility should be verified for your specific system.
What is the NSN for 696D?
696D is cataloged in the U.S. Government catalog under NSN 5305-00-752-1058. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 696D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.