PartsTable
Technical Data Sheet
Download PDF

696564 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

696564: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.618 INCHES MINIMUM AND 0.618 INCHES MINIMUM AND 0.620 INCHES MAXIMUM0.620 INCHES MAXIMUM IN, overall_length: 4.625 INCHES NOMINAL4.625 INCHES NOMINAL IN, undercut_width: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN, first_end_style: CHAMFEREDCHAMFERED, effective_length: 2.031 INCHES NOMINAL2.031 INCHES NOMINAL IN, second_end_style: THREADED AND COUNTERBOREDTHREADED AND COUNTERBORED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-334-9779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
696564
NSN: 5315-01-334-9779
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter0.618 INCHES MINIMUM AND 0.618 INCHES MINIMUM AND 0.620 INCHES MAXIMUM0.620 INCHES MAXIMUM IN
overall_length4.625 INCHES NOMINAL4.625 INCHES NOMINAL IN
undercut_width0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
first_end_styleCHAMFEREDCHAMFERED
effective_length2.031 INCHES NOMINAL2.031 INCHES NOMINAL IN
second_end_styleTHREADED AND COUNTERBOREDTHREADED AND COUNTERBORED
special_featuresEXTRA HOLE NEAR SECOND HOLE 0.220 IN. DIAEXTRA HOLE NEAR SECOND HOLE 0.220 IN. DIA IN
style_designatorGROOVEGROOVE
undercut_diameter0.560 INCHES NOMINAL0.560 INCHES NOMINAL IN
first_end_locationUNTHREADED ENDUNTHREADED END
first_hole_diameter0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN
second_hole_diameter0.156 INCHES MINIMUM AND 0.156 INCHES MINIMUM AND 0.162 INCHES MAXIMUM0.162 INCHES MAXIMUM IN
NSN5315-01-334-9779
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 696564 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL0.062 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.560 INCHES NOMINAL0.560 INCHES NOMINAL IN
•
FIRST END LOCATION: UNTHREADED ENDUNTHREADED END
•
SECOND END TAPER ANGLE: 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLEDBOTH END DRILLED
•
FIRST END STYLE: CHAMFEREDCHAMFERED
•
FIRST HOLE DIAMETER: 0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.062 INCHES NOMINAL0.062 INCHES NOMINAL IN
UNDERCUT DIAMETER0.560 INCHES NOMINAL0.560 INCHES NOMINAL IN
FIRST END LOCATIONUNTHREADED ENDUNTHREADED END
SECOND END TAPER ANGLE45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEBOTH END DRILLEDBOTH END DRILLED
FIRST END STYLECHAMFEREDCHAMFERED
FIRST HOLE DIAMETER0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN
STYLE DESIGNATORGROOVEGROOVE
DIAMETER0.618 INCHES MINIMUM AND 0.618 INCHES MINIMUM AND 0.620 INCHES MAXIMUM0.620 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315PL0970423Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 696564?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 696564?
696564 is a PIN,GROOVED,HEADLESS.
What parts can replace 696564?
There is 1 known substitute for 696564: 5315PL0970423. Substitute compatibility should be verified for your specific system.
What is the NSN for 696564?
696564 is cataloged in the U.S. Government catalog under NSN 5315-01-334-9779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 696564

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.