PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 69651-4
69651-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include radius: 0.219 INCHES NOMINAL IN, material: COPPER ALLOY, construction: SOLID, overall_length: 1.125 INCHES NOMINAL IN, outside_diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, style_designator: CONCAVE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-062-2350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69651-4
NSN: 5340-00-062-2350
FSC: 5340
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
radius0.219 INCHES NOMINAL IN
materialCOPPER ALLOY
constructionSOLID
overall_length1.125 INCHES NOMINAL IN
outside_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
style_designatorCONCAVE
surface_treatmentTIN
material_thickness0.032 INCHES NOMINAL IN
cross-sectional_width0.437 INCHES NOMINAL IN
cross-sectional_height0.031 INCHES NOMINAL IN
mounting_configurationTWO 0.201 IN. DIA HOLES 0.687 IN. C TO C IN
body_cross-sectional_shapeU-SHAPED
NSN5340-00-062-2350
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69651-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-561, H14-CANCELLED FED SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
RADIUS: 0.219 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCONCAVE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-561, H14-CANCELLED FED SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
RADIUS0.219 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1977701-004-12Interchangeable
interchangeable cross-reference
interchangeable
69-651Interchangeable
interchangeable cross-reference
interchangeable
GL802B5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 69651-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69651-4?
69651-4 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 69651-4?
There are 3 known substitutes for 69651-4: 1977701-004-12, 69-651, GL802B5. Substitute compatibility should be verified for your specific system.
What is the NSN for 69651-4?
69651-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-062-2350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69651-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026