PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6960-0027
6960-0027 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC POLYAMIDE NYLON, design_type: FRICTION, overall_diameter: 0.719 INCHES NOMINAL IN, special_features: COLOR BLACK; OVERALL HT 0.406 IN. IN, opening_inside_diameter_for_which_designed: 0.625 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-121-8277, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6960-0027
NSN: 5340-01-121-8277
FSC: 5340
CAGE: 28480 — HEWLETT-PACKARD COMPANY DBA HP (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
design_typeFRICTION
overall_diameter0.719 INCHES NOMINAL IN
special_featuresCOLOR BLACK; OVERALL HT 0.406 IN. IN
opening_inside_diameter_for_which_designed0.625 INCHES NOMINAL IN
NSN5340-01-121-8277
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6960-0027 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.719 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYAMIDE NYLON
DESIGN TYPEFRICTION
OVERALL DIAMETER0.719 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLACK; OVERALL HT 0.406 IN. IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
3813775Upgraded Successor
successor cross-reference
successor
P625Upgraded Successor
successor cross-reference
successor
353243Interchangeable
interchangeable cross-reference
interchangeable
353403Interchangeable
interchangeable cross-reference
interchangeable
PC-436Interchangeable
interchangeable cross-reference
interchangeable
316GC1184AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6960-0027?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6960-0027?
6960-0027 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 6960-0027?
There are 9 known substitutes for 6960-0027: 3813775, P625, 353243 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6960-0027?
6960-0027 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-121-8277. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6960-0027

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026