PartsTable
Technical Data Sheet
Download PDF

6960-0010 — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6960-0010: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.078 INCHES NOMINAL IN, overall_height: 0.281 INCHES NOMINAL IN, style_designator: STANDARD, surface_treatment: NICKEL, head_outside_diameter: 0.797 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-049-6185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6960-0010
NSN: 5340-01-049-6185
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL
head_height0.078 INCHES NOMINAL IN
overall_height0.281 INCHES NOMINAL IN
prong_quantity8
style_designatorSTANDARD
surface_treatmentNICKEL
head_outside_diameter0.797 INCHES NOMINAL IN
prong_outside_diameter0.641 INCHES NOMINAL IN
hole_accommodation_diameter0.625 INCHES NOMINAL IN
material_accommodated_thickness0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
NSN5340-01-049-6185
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6960-0010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.078 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 0.641 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL
•
HEAD OUTSIDE DIAMETER: 0.797 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.281 INCHES NOMINAL IN
HEAD HEIGHT0.078 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.625 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER0.641 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL
HEAD OUTSIDE DIAMETER0.797 INCHES NOMINAL IN
MATERIALSTEEL
PRONG QUANTITY8
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
SS-48172-K1110Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6960-0010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6960-0010?
6960-0010 is a BUTTON,PLUG.
What parts can replace 6960-0010?
There is 1 known substitute for 6960-0010: SS-48172-K1110. Substitute compatibility should be verified for your specific system.
What is the NSN for 6960-0010?
6960-0010 is cataloged in the U.S. Government catalog under NSN 5340-01-049-6185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6960-0010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.