PartsTable
Technical Data Sheet
Download PDF

695783 — PIPE ASSEMBLY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

695783: PIPE ASSEMBLY.

The PIPE ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_style: SPLINE, nut_height: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, nut_diameter: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, pilot_length: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-596-5477, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
695783
NSN: 5310-00-596-5477
NIINs: 005965477, 007604376
FSC: 5310 — Nuts and Washers
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
nut_styleSPLINE
nut_height0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
nut_diameter0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
pilot_length0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
pilot_diameter0.422 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch28
NSN5310-00-596-5477
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 695783 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.422 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
PILOT DIAMETER0.422 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
PILOT LENGTH0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
NUT HEIGHT0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
REA048Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 695783?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 695783?
695783 is a PIPE ASSEMBLY.
What parts can replace 695783?
There is 1 known substitute for 695783: REA048. Substitute compatibility should be verified for your specific system.
What is the NSN for 695783?
695783 is cataloged in the U.S. Government catalog under NSN 5310-00-596-5477. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 695783

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.