PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 69477-7
69477-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RETAINER AND ROLLERS,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, body_length: 2.000 INCHES NOMINAL IN, bore_diameter: 1.5020 INCHES MINIMUM AND 1.5070 INCHES MAXIMUM IN, inclosure_type: FULLY INCLOSED, overall_length: 2.440 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S) SINGLE GROUP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-438-6461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69477-7
NSN: 3110-00-438-6461
FSC: 3110
CAGE: 5XMS1 — JTEKT BEARINGS NORTH AMERICA LLC DIV KBNA - ORD 1 (USA)
SPECIFICATIONS
materialSTEEL RETAINER
body_length2.000 INCHES NOMINAL IN
bore_diameter1.5020 INCHES MINIMUM AND 1.5070 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_length2.440 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating400.0 HERTZ NOMINAL SINGLE COMPONENT
outside_diameter2.1670 INCHES MINIMUM AND 2.1770 INCHES MAXIMUM IN
style_designatorRETAINER AND ROLLERS, THRUST
winding_power_rating22.0 WATTS SINGLE COMPONENT ALL SECONDARY
body_outside_diameter2.120 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
NSN3110-00-438-6461
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 69477-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: STAMPED
•
ROLLING ELEMENT DIAMETER: 0.0781 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RETAINER AND ROLLERS, THRUST
•
MATERIAL: STEEL RETAINER
•
OUTSIDE DIAMETER: 2.1670 INCHES MINIMUM AND 2.1770 INCHES MAXIMUM IN
•
RETAINER PIECE QUANTITY: 2
•
BORE DIAMETER: 1.5020 INCHES MINIMUM AND 1.5070 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODSTAMPED
ROLLING ELEMENT DIAMETER0.0781 INCHES NOMINAL IN
STYLE DESIGNATORRETAINER AND ROLLERS, THRUST
MATERIALSTEEL RETAINER
OUTSIDE DIAMETER2.1670 INCHES MINIMUM AND 2.1770 INCHES MAXIMUM IN
RETAINER PIECE QUANTITY2
BORE DIAMETER1.5020 INCHES MINIMUM AND 1.5070 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440C ROLLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
NTA2435Interchangeable
interchangeable cross-reference
interchangeable
277060Interchangeable
interchangeable cross-reference
interchangeable
C5M30012Interchangeable
interchangeable cross-reference
interchangeable
13885Interchangeable
interchangeable cross-reference
interchangeable
5900666Interchangeable
interchangeable cross-reference
interchangeable
694777Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 69477-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69477-7?
69477-7 is a RETAINER AND ROLLERS,BEARING.
What parts can replace 69477-7?
There are 7 known substitutes for 69477-7: NTA2435, 277060, C5M30012 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 69477-7?
69477-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-438-6461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69477-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026