PartsTable
Technical Data Sheet
Download PDF

69455 — PLATE SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

69455: PLATE SPRING.

The PLATE SPRING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE, garment_style: PULLOVER, fiber_material: OLEFIN, size_designation: LARGE, sleeve_cuff_type: KNIT, special_features: NON-STERILE; IMPREVIOUS OPEN BACK GOWN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-738-7552, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69455
NSN: 5340-00-738-7552
NIINs: 007387552, 010794613, 013742041
FSC: 5340 — Hardware, Commercial
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE
garment_stylePULLOVER
fiber_materialOLEFIN
size_designationLARGE
sleeve_cuff_typeKNIT
special_featuresNON-STERILE; IMPREVIOUS OPEN BACK GOWN
unit_package_typePACKAGE
garment_sleeve_lengthFULL LENGTH
unit_package_quantity60
garment_closing_methodRIBBON TIE BACK
NSN5340-00-738-7552
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69455 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STOCK DIAMETER: 0.078 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
SURFACE TREATMENT: PHOSPHATE
•
WIDTH: 0.843 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.406 INCHES NOMINAL IN
STOCK DIAMETER0.078 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
SURFACE TREATMENTPHOSPHATE
WIDTH0.843 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 3
17256P11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
745-240345Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10510313Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 69455?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69455?
69455 is a PLATE SPRING.
What parts can replace 69455?
There are 3 known substitutes for 69455: 17256P11, 745-240345, 10510313. Substitute compatibility should be verified for your specific system.
What is the NSN for 69455?
69455 is cataloged in the U.S. Government catalog under NSN 5340-00-738-7552. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69455