PartsTable
Technical Data Sheet
Download PDF

69403-15 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

69403-15: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, peripheral_diameter: 0.713 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN, center_hole_diameter: 0.473 INCHES MINIMUM AND 0.476 INCHES MAXIMUM IN, cross-sectional_height: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, cross-sectional_thickness: 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-994-7588, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69403-15
NSN: 5330-00-994-7588
FSC: 5330 — Packing and Gasket Materials
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
peripheral_diameter0.713 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
center_hole_diameter0.473 INCHES MINIMUM AND 0.476 INCHES MAXIMUM IN
cross-sectional_height0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
cross-sectional_thickness0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
cross-sectional_shape_styleU
NSN5330-00-994-7588
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69403-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: U
•
PERIPHERAL DIAMETER: 0.713 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.473 INCHES MINIMUM AND 0.476 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEU
PERIPHERAL DIAMETER0.713 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.473 INCHES MINIMUM AND 0.476 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
69403-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 69403-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69403-15?
69403-15 is a PACKING,PREFORMED.
What parts can replace 69403-15?
There is 1 known substitute for 69403-15: 69403-16. Substitute compatibility should be verified for your specific system.
What is the NSN for 69403-15?
69403-15 is cataloged in the U.S. Government catalog under NSN 5330-00-994-7588. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69403-15