PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 69399R2284S
69399R2284S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, outside_diameter: 7.369 INCHES MINIMUM AND 7.379 INCHES MAXIMUM IN, special_features: MATERIAL 0.010THK, style_designator: CIRCULAR, aperture_diameter: 7.115 INCHES MINIMUM AND 7.125 INCHES MAXIMUM IN, cross-sectional_thickness: 0.110 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-474-4340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69399R2284S
NSN: 5330-01-474-4340
FSC: 5330
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
outside_diameter7.369 INCHES MINIMUM AND 7.379 INCHES MAXIMUM IN
special_featuresMATERIAL 0.010THK
style_designatorCIRCULAR
aperture_diameter7.115 INCHES MINIMUM AND 7.125 INCHES MAXIMUM IN
cross-sectional_thickness0.110 INCHES NOMINAL IN
cross-sectional_shape_styleC-RING
material_document_and_classificationAMS 5596 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyC-SEAL 7.374 OD AXIAL TYPE,1/8IN SECTION IN
NSN5330-01-474-4340
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69399R2284S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: C-RING
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 7.115 INCHES MINIMUM AND 7.125 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.110 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 7.369 INCHES MINIMUM AND 7.379 INCHES MAXIMUM IN
•
MATERIAL: NICKEL ALLOY 718 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5596 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYC-SEAL 7.374 OD AXIAL TYPE,1/8IN SECTION IN
CROSS-SECTIONAL SHAPE STYLEC-RING
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER7.115 INCHES MINIMUM AND 7.125 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.110 INCHES NOMINAL IN
OUTSIDE DIAMETER7.369 INCHES MINIMUM AND 7.379 INCHES MAXIMUM IN
MATERIALNICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5596 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
SPECIAL FEATURESMATERIAL 0.010THK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
26560010Interchangeable
interchangeable cross-reference
interchangeable
12593Interchangeable
interchangeable cross-reference
interchangeable
1251-0056Interchangeable
interchangeable cross-reference
interchangeable
CH1947521Interchangeable
interchangeable cross-reference
interchangeable
1947521Interchangeable
interchangeable cross-reference
interchangeable
R0362GMQInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 69399R2284S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69399R2284S?
69399R2284S is a GASKET.
What parts can replace 69399R2284S?
There are 9 known substitutes for 69399R2284S: 26560010, 12593, 1251-0056 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 69399R2284S?
69399R2284S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-474-4340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69399R2284S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026