PartsTable
Technical Data Sheet
Download PDF

69382-750A-32 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

69382-750A-32: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: SQUARE INTERNALLY THREADED, special_features: SECOND END HAS THREADED HOLE 0.312-18 UNC 2B,0.380 IN. DEEP IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-194-4648, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69382-750A-32
NSN: 5315-01-194-4648
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 71838 — SPS TECHNOLOGIES AFG DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
hardness_rating47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleSQUARE INTERNALLY THREADED
special_featuresSECOND END HAS THREADED HOLE 0.312-18 UNC 2B,0.380 IN. DEEP IN
surface_treatmentPHOSPHATE OVERALL
pin_overall_length1.990 INCHES MINIMUM AND 2.005 INCHES MAXIMUM IN
pin_overall_diameter0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
first_end_taper_length0.050 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-194-4648
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 69382-750A-32 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.050 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232 TYZ,CL1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.990 INCHES MINIMUM AND 2.005 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.050 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232 TYZ,CL1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
HARDNESS RATING47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.990 INCHES MINIMUM AND 2.005 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SPECIAL FEATURESSECOND END HAS THREADED HOLE 0.312-18 UNC 2B,0.380 IN. DEEP IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
850-100 REV C ITEM 41Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9376963-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 69382-750A-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69382-750A-32?
69382-750A-32 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 69382-750A-32?
There are 2 known substitutes for 69382-750A-32: 850-100 REV C ITEM 41, 9376963-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 69382-750A-32?
69382-750A-32 is cataloged in the U.S. Government catalog under NSN 5315-01-194-4648. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69382-750A-32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.