PartsTable
Technical Data Sheet
Download PDF

6935153 — CLAMP,BRIDGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6935153: CLAMP,BRIDGE.

The CLAMP,BRIDGE is a the manufacturer industrial component. Key specifications include height: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, material: ALUMINUM ALLOY OVERALL, hole_diameter: 0.328 INCHES NOMINAL IN, overall_width: 0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN, overall_length: 0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN, style_designator: GENERAL PURPOSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-483-1131, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6935153
NSN: 5340-01-483-1131
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
height0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
materialALUMINUM ALLOY OVERALL
hole_diameter0.328 INCHES NOMINAL IN
overall_width0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
overall_length0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
style_designatorGENERAL PURPOSE
NSN5340-01-483-1131
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6935153 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: GENERAL PURPOSE
•
HEIGHT: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
HOLE DIAMETER: 0.328 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORGENERAL PURPOSE
OVERALL LENGTH0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
HEIGHT0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY OVERALL
HOLE DIAMETER0.328 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6935153?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6935153?
6935153 is a CLAMP,BRIDGE.
What is the NSN for 6935153?
6935153 is cataloged in the U.S. Government catalog under NSN 5340-01-483-1131. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6935153