PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 69343
69343 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WRAPPER,STERILIZATION is a the manufacturer industrial component. Key specifications include material: NON-WOVEN FABRIC, nut_style: HEXAGON, nut_height: 9.00 MILLIMETERS NOMINAL MM, overall_width: 15.000 INCHES NOMINAL IN, thread_series: ISO M, overall_length: 15.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-070-7116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69343
NSN: 5310-01-070-7116
FSC: 5310
CAGE: 16004 — DAVEY COMPRESSOR CO DIV OF KECO INDUSTRIES INC (USA)
SPECIFICATIONS
materialNON-WOVEN FABRIC
nut_styleHEXAGON
nut_height9.00 MILLIMETERS NOMINAL MM
overall_width15.000 INCHES NOMINAL IN
thread_seriesISO M
overall_length15.000 INCHES NOMINAL IN
special_featuresBLUE; WATER REPELLENT; CASE OF 1000
thread_directionRIGHT-HAND
countersink_angle120.0 DEGREES NOMINAL NUT
features_providedDOUBLE THICKNESS
width_across_flats30.00 MILLIMETERS NOMINAL MM
nominal_thread_size20.0 MILLIMETERS MM
NSN5310-01-070-7116
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 69343 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD TOLERANCE CLASS: 6H INTERNAL
•
BEARING SURFACE TYPE: CHAMFERED
•
MATERIAL: STEEL OVERALL
•
COUNTERSINK ANGLE: 120.0 DEGREES NOMINAL NUT
•
NUT STYLE: HEXAGON
•
THREAD PITCH IN MILLIMETERS: 1.50
•
THREAD SERIES: ISO M
•
NOMINAL THREAD SIZE: 20.0 MILLIMETERS MM
TECHNICAL CHARACTERISTICS (FLIS)
THREAD TOLERANCE CLASS6H INTERNAL
BEARING SURFACE TYPECHAMFERED
MATERIALSTEEL OVERALL
COUNTERSINK ANGLE120.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
THREAD PITCH IN MILLIMETERS1.50
THREAD SERIESISO M
NOMINAL THREAD SIZE20.0 MILLIMETERS MM
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT9.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
KIMGUARDInterchangeable
interchangeable cross-reference
interchangeable
69343Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 69343?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69343?
69343 is a WRAPPER,STERILIZATION.
What parts can replace 69343?
There are 2 known substitutes for 69343: KIMGUARD, 69343. Substitute compatibility should be verified for your specific system.
What is the NSN for 69343?
69343 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-070-7116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69343

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026