PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 693-162-2
693-162-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), special_features: COLOR RED, length_under_shoulder: 0.570 INCHES MAXIMUM IN, open_end_inside_diameter: 0.600 INCHES MAXIMUM IN, closed_end_overall_diameter: 0.656 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-6492, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
693-162-2
NSN: 5340-00-619-6492
FSC: 5340
CAGE: 72314 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
special_featuresCOLOR RED
length_under_shoulder0.570 INCHES MAXIMUM IN
open_end_inside_diameter0.600 INCHES MAXIMUM IN
closed_end_overall_diameter0.656 INCHES MAXIMUM IN
NSN5340-00-619-6492
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 693-162-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
CLOSED END OVERALL DIAMETER: 0.656 INCHES MAXIMUM IN
•
OPEN END INSIDE DIAMETER: 0.600 INCHES MAXIMUM IN
•
LENGTH UNDER SHOULDER: 0.570 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC, POLYETHYLENE (PP)
CLOSED END OVERALL DIAMETER0.656 INCHES MAXIMUM IN
OPEN END INSIDE DIAMETER0.600 INCHES MAXIMUM IN
LENGTH UNDER SHOULDER0.570 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR RED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
6971-0014Upgraded Successor
successor cross-reference
successor
MS90376-12RBUpgraded Successor
successor cross-reference
successor
M85049/138-24CUpgraded Successor
successor cross-reference
successor
6972-0012Upgraded Successor
successor cross-reference
successor
M85049/138-22CUpgraded Successor
successor cross-reference
successor
M85049/138-20CUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 693-162-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 693-162-2?
693-162-2 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 693-162-2?
There are 23 known substitutes for 693-162-2: 6971-0014, MS90376-12RB, M85049/138-24C and 20 more. Substitute compatibility should be verified for your specific system.
Is 693-162-2 still available?
693-162-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 693-162-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026