PartsTable
Technical Data Sheet
Download PDF

69194 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited
GIGABYTE · ORING SEAL
PRODUCT OVERVIEW

69194: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a GIGABYTE industrial component. Key specifications include material: STEEL COMP 302 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 0.4413 POUNDS MINIMUM AND 0.4987 POUNDS MAXIMUM LBS, coil_quantity: 14-3/10, inside_diameter: 0.200 INCHES MINIMUM IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-081-9200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69194
NSN: 5340-00-081-9200
NIINs: 000819200, 004228471
FSC: 5340 — Hardware, Commercial
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
load_rating0.4413 POUNDS MINIMUM AND 0.4987 POUNDS MAXIMUM LBS
coil_quantity14-3/10
inside_diameter0.200 INCHES MINIMUM IN
style_designatorCYLINDRICAL
spring_free_length0.843 INCHES NOMINAL IN
spring_solid_length0.361 INCHES MAXIMUM IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate3.820 POUNDS PER INCH NOMINAL LBS
spring_length_under_load0.719 INCHES NOMINAL IN
spring_free_outside_diameter0.265 INCHES MAXIMUM IN
NSN5340-00-081-9200
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69194 MFR: GIGABYTE ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
DIAMETER: 0.234 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LENGTH1.172 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
DIAMETER0.234 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
240023Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
L31408Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9L2270Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2406927Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 69194?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69194?
69194 is a SPRING,HELICAL,COMPRESSION manufactured by GIGABYTE.
What parts can replace 69194?
There are 4 known substitutes for 69194: 240023, L31408, 9L2270 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 69194?
69194 is cataloged in the U.S. Government catalog under NSN 5340-00-081-9200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69194