PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 69120-201
69120-201 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, surface_finish: 10.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN, pin_overall_diameter: 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-682-1925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69120-201
NSN: 5315-00-682-1925
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
surface_finish10.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
pin_overall_diameter0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
first_end_taper_angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
first_end_taper_length0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-682-1925
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 69120-201 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 303 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL LENGTH: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
MATERIALSTEEL COMP 303 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
PIN OVERALL LENGTH1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
FIRST END TAPER LENGTH0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
45051Interchangeable
interchangeable cross-reference
interchangeable
A310Interchangeable
interchangeable cross-reference
interchangeable
604Interchangeable
interchangeable cross-reference
interchangeable
13029362-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 69120-201?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69120-201?
69120-201 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 69120-201?
There are 4 known substitutes for 69120-201: 45051, A310, 604 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 69120-201?
69120-201 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-682-1925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69120-201

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026