691-3102-8 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

691-3102-8: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 0.875 INCHES NOMINAL IN, body_diameter: 0.312 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.500 INCHES MINIMUM IN, style_designator: AXIAL TERMINAL EACH END. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-068-9281, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 691-3102-8

NSN: 5905-01-068-9281
FSC: 5905 — Resistor
CAGE: 27555 — ORBITAL SCIENCES LLC (USA)

SPECIFICATIONS

body_length	0.875 INCHES NOMINAL IN
body_diameter	0.312 INCHES NOMINAL IN
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
terminal_length	1.500 INCHES MINIMUM IN
style_designator	AXIAL TERMINAL EACH END
electrical_resistance	0.100 OHMS
reliability_indicator	ESTABLISHED
specification/standard_data	81349-MIL-R-39007/6 GOVERNMENT SPECIFICATION
resistance_tolerance_in_percent	-1.000 TO 1.000
ambient_temp_at_full_rated_power	25.0 CELSIUS DEGC
power_dissipation_rating_in_watts	5.000 FREE AIR
NSN	5905-01-068-9281

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -90.0 TO 90.0

•

BODY DIAMETER: 0.312 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE: 0.100 OHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

TERMINAL LENGTH: 1.500 INCHES MINIMUM IN

•

TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 275.0

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-90.0 TO 90.0
BODY DIAMETER	0.312 INCHES NOMINAL IN
ELECTRICAL RESISTANCE	0.100 OHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
TERMINAL LENGTH	1.500 INCHES MINIMUM IN
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 275.0
STYLE DESIGNATOR	AXIAL TERMINAL EACH END
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001

SUBSTITUTES & CROSS-REFERENCES 8

0811-2490Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

KM-500Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

45JR10Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CP5-0-1-10PCTReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RS-5/0-10-0HM/P0RM3PReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

500448Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 691-3102-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 691-3102-8?

691-3102-8 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace 691-3102-8?

There are 8 known substitutes for 691-3102-8: 0811-2490, KM-500, 45JR10 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 691-3102-8?

691-3102-8 is cataloged in the U.S. Government catalog under NSN 5905-01-068-9281. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

691-3102-8 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — 691-3102-8