PartsTable
Technical Data Sheet
PartsTable / MRO / 69-548
69-548 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL COMP 303 OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.156 INCHES NOMINAL IN, point_style: FLAT, point_length: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-004-4925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 69-548
NSN: 5305-00-004-4925
FSC: 5305
CAGE: 93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
hole_typeDRILLED
head_styleFLAT CHAMFER
head_height0.156 INCHES NOMINAL IN
point_styleFLAT
point_length0.250 INCHES NOMINAL IN
thread_class3A A
head_diameter0.438 INCHES NOMINAL IN
hole_diameter0.078 INCHES NOMINAL IN
hole_quantity2
thread_length1.146 INCHES MINIMUM IN
point_diameter0.406 INCHES NOMINAL IN
NSN5305-00-004-4925
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 69-548 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT CHAMFER
•
HOLE QUANTITY: 2
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD CLASS: 3A A
•
POINT LENGTH: 0.250 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.562 INCHES IN
•
MATERIAL: STEEL COMP 303 OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT CHAMFER
HOLE QUANTITY2
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD CLASS3A A
POINT LENGTH0.250 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.562 INCHES IN
MATERIALSTEEL COMP 303 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD LENGTH1.146 INCHES MINIMUM IN
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
13214E3263Interchangeable
interchangeable cross-reference
interchangeable
69-548Interchangeable
interchangeable cross-reference
interchangeable
MILR22-3Interchangeable
interchangeable cross-reference
interchangeable
4210PL1824654Interchangeable
interchangeable cross-reference
interchangeable
AGF0275Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 69-548?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69-548?
69-548 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 69-548?
There are 5 known substitutes for 69-548: 13214E3263, 69-548, MILR22-3 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 69-548?
69-548 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-004-4925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69-548

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026