PartsTable
Technical Data Sheet
Download PDF

69-10040-0 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

69-10040-0: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.422 INCHES NOMINAL IN, height: 0.172 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, design_type: CLAW ENGAGING, hole_diameter: 0.120 INCHES NOMINAL IN, overall_width: 0.484 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-193-9763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69-10040-0
NSN: 5340-01-193-9763
FSC: 5340 — Hardware, Commercial
CAGE: 50423 — BALLANTINE LABORATORIES INC (USA)
SPECIFICATIONS
width0.422 INCHES NOMINAL IN
height0.172 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
design_typeCLAW ENGAGING
hole_diameter0.120 INCHES NOMINAL IN
hole_quantity1
overall_width0.484 INCHES NOMINAL IN
overall_height0.312 INCHES NOMINAL IN
overall_length0.500 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVEL
features_providedPADLOCK EYE
NSN5340-01-193-9763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69-10040-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 1
•
DESIGN TYPE: CLAW ENGAGING
•
ENGAGING SURFACE WIDTH: 0.328 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVEL
•
CATCH STRIKE STYLE: MORTISE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.312 INCHES NOMINAL IN
SURFACE HOLE QUANTITY1
DESIGN TYPECLAW ENGAGING
ENGAGING SURFACE WIDTH0.328 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
STYLE DESIGNATORLEVEL
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.500 INCHES NOMINAL IN
FEATURES PROVIDEDPADLOCK EYE
OVERALL WIDTH0.484 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 69-10040-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69-10040-0?
69-10040-0 is a CATCH,CLAMPING.
What is the NSN for 69-10040-0?
69-10040-0 is cataloged in the U.S. Government catalog under NSN 5340-01-193-9763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69-10040-0

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.