68A410784-2005: PIN,GROOVED,HEADED.
The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, diameter: 0.5015 INCHES MINIMUM AND 0.5025 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, head_style: FILLISTER, first_end_style: SQUARE, undercut_radius: 0.030 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5315-01-251-6436, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| diameter | 0.5015 INCHES MINIMUM AND 0.5025 INCHES MAXIMUM IN |
| material | COPPER ALLOY 172 OVERALL |
| head_style | FILLISTER |
| first_end_style | SQUARE |
| undercut_radius | 0.030 INCHES NOMINAL IN |
| special_features | HOLE IN HEAD OF PIN 0.1560 IN. MIN DIA 0.1641 IN. MAX DIA,0.200 IN. DEEP; COUNTERSUNK 90.0 DEGREE BY 0.217 IN. DIA;THREADED 10-32 UNF-2A,0.200 IN. DEEP A |
| style_designator | GROOVE |
| pin_head_diameter | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN |
| under_head_length | 0.437 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN |
| undercut_diameter | 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN |
| criticality_code_justification | SUPP |
| NSN | 5315-01-251-6436 |
| UNDERCUT DIAMETER | 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN |
| UNDER HEAD LENGTH | 0.437 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN |
| FIRST END STYLE | SQUARE |
| SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS TOLERANCE, HEAT TREATMENT, SURFACE FINISH, OR MATERIAL TYPE AND SPECIAL INSP. REQ.S SUCH AS MAGNETIC PARTICLE INSP. OR FLUORESCENT PENETRANT INSPECTION |
| CRITICALITY CODE JUSTIFICATION | SUPP |
| STYLE DESIGNATOR | GROOVE |
| PIN HEAD DIAMETER | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 COND H FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| DIAMETER | 0.5015 INCHES MINIMUM AND 0.5025 INCHES MAXIMUM IN |
| HEAD STYLE | FILLISTER |
No substitute or cross-reference records for this part.