PartsTable
Technical Data Sheet
Download PDF

6893419-2 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6893419-2: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: PLASTIC, overall_width: 1.2200 INCHES MINIMUM AND 1.2800 INCHES MAXIMUM IN, overall_height: 1.0700 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM IN, overall_length: 3.1000 INCHES MINIMUM AND 3.1600 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-451-0747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6893419-2
NSN: 5340-01-451-0747
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC
overall_width1.2200 INCHES MINIMUM AND 1.2800 INCHES MAXIMUM IN
overall_height1.0700 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM IN
overall_length3.1000 INCHES MINIMUM AND 3.1600 INCHES MAXIMUM IN
special_featuresTHERE ARE TWO SLOTS WITH A LENGTH OF MIN. 0.4600 IN. AND MAX. 0.4900 IN. AND WIDTH OF MIN. 0.2570 IN. AND MAX. OF 0.2680 IN.;THE ITEM IS MADE OF URETHANE IN
mounting_hole_quantity2
NSN5340-01-451-0747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6893419-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT1.0700 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM IN
OVERALL LENGTH3.1000 INCHES MINIMUM AND 3.1600 INCHES MAXIMUM IN
OVERALL WIDTH1.2200 INCHES MINIMUM AND 1.2800 INCHES MAXIMUM IN
SPECIAL FEATURESTHERE ARE TWO SLOTS WITH A LENGTH OF MIN. 0.4600 IN. AND MAX. 0.4900 IN. AND WIDTH OF MIN. 0.2570 IN. AND MAX. OF 0.2680 IN.;THE ITEM IS MADE OF URETHANE IN
MATERIALPLASTIC
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6893419-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6893419-2?
6893419-2 is a BRACKET,MOUNTING.
What is the NSN for 6893419-2?
6893419-2 is cataloged in the U.S. Government catalog under NSN 5340-01-451-0747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6893419-2