PartsTable
Technical Data Sheet
Download PDF

6892069-1 — BUSHING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

6892069-1: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 954 OVERALL, corner_shape: SQUARE OUTSIDE LEFT CORNER, flange_width: 0.0600 INCHES NOMINAL IN, overall_length: 0.5350 INCHES MINIMUM AND 0.5450 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES INTERMEDIATE LAYER, special_features: RIGHT END BODY HOLE DIA REDUCED TO 0.3200 IN. ID,BODY OD REDUCED BY 0.0020 IN.

MIN 0.0060 IN. MAX 0.2200 IN. LG IN.

This part is cataloged in the U.S. Government catalog under NSN 3120-01-061-6932, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6892069-1
NSN: 3120-01-061-6932
NIINs: 010616932, 011055804
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
materialCOPPER ALLOY 954 OVERALL
corner_shapeSQUARE OUTSIDE LEFT CORNER
flange_width0.0600 INCHES NOMINAL IN
overall_length0.5350 INCHES MINIMUM AND 0.5450 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES INTERMEDIATE LAYER
special_featuresRIGHT END BODY HOLE DIA REDUCED TO 0.3200 IN. ID,BODY OD REDUCED BY 0.0020 IN. MIN 0.0060 IN. MAX 0.2200 IN. LG IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.4890 INCHES MINIMUM AND 0.4910 INCHES MAXIMUM IN
body_outside_diameter0.6000 INCHES MINIMUM AND 0.6005 INCHES MAXIMUM IN
flange_outside_diameter0.7300 INCHES NOMINAL IN
material_document_and_classificationASTM B505 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3120-01-061-6932
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 6892069-1 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES RIGHT END SURFACE OF BODY
•
CORNER SHAPE: CHAMFERED INSIDE LEFT CORNER
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH40.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
SUBSTITUTES & CROSS-REFERENCES 1
6892069Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6892069-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6892069-1?
6892069-1 is a BUSHING,SLEEVE.
What parts can replace 6892069-1?
There is 1 known substitute for 6892069-1: 6892069. Substitute compatibility should be verified for your specific system.
What is the NSN for 6892069-1?
6892069-1 is cataloged in the U.S. Government catalog under NSN 3120-01-061-6932. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6892069-1