PartsTable
Technical Data Sheet
689-1 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This is a versatile little accessory for amateur and professional photographers alike<br><br>The adjustable shoe from Hama should find a home in any gadget bag; with its versatility it can be used in a studio or outdoor location. In the studio the mount can act as a simple device to allow a shoe mounting flash gun to be attached to a lighting stand or tripod with a standard 6.4mm/1/4” threaded mount by means of the integral socket in its base. The angle adjustment will allow the flash to be angled up or down for optimum illumination and can be locked into position by use of the convenient knob on the side of the mount.<br><br>For outdoor use, 2 of these can be mounted on arms to either or both sides of the camera to provide close up illumination for macro photography of plants, insects, etc.

The adjustable mount ensures that the correct angles of illumination can be created to provide stunning close up images. Using this device the flashgun needs to be triggered by use of a cable conta This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-009-4093, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 689-1
NSN: 5330-00-009-4093
FSC: 5330
CAGE: 3DBN7 — KIRKHILL INC DIV KIRKHILL INC, HASKON DIVISION (USA)
SPECIFICATIONS
materialCOPPER ALLOY
duty_typeHEAVY
body_styleBUSHING MOUNT
body_width0.687 INCHES NOMINAL IN
inlet_typeSLEEVE
body_height0.562 INCHES NOMINAL IN
body_length1.125 INCHES NOMINAL IN
body_diameter0.615 INCHES NOMINAL IN
overall_depth7.625 INCHES NOMINAL IN
overall_width15.375 INCHES NOMINAL IN
actuator_styleROUND
bushing_length0.250 INCHES NOMINAL IN
NSN5330-00-009-4093
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 689-1 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESUSED ON F-5 FREEDOM FIGHTER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
68-91Interchangeable
interchangeable cross-reference
interchangeable
86-CP-4SInterchangeable
interchangeable cross-reference
interchangeable
AK5445Interchangeable
interchangeable cross-reference
interchangeable
9000-S6202-74187Interchangeable
interchangeable cross-reference
interchangeable
689.1Interchangeable
interchangeable cross-reference
interchangeable
20Interchangeable
2 x Intel Xeon E5-2650 v4 2.2GHz,30M Cache,9.60GT/s QPI,Turbo,HT,12C/24T (105W) Max Mem 2400MHz
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 689-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 689-1?
689-1 is a SOCKET,PLUG-IN ELECTRONIC COMPON manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 689-1?
There are 12 known substitutes for 689-1: 68-91, 86-CP-4S, AK5445 and 9 more. Substitute compatibility should be verified for your specific system.
Is 689-1 still available?
689-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 689-1