PartsTable
Technical Data Sheet
Download PDF

6887674 — KEY,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6887674: KEY,MACHINE.

The KEY,MACHINE is a the manufacturer industrial component. Key specifications include hardness_rating: 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL, key_chamfer_angle: 45.0 DEGREES NOMINAL, key_chamfer_length: 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN, starting_edge_shape: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-317-4893, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6887674
NSN: 5315-00-317-4893
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
hardness_rating40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
key_chamfer_angle45.0 DEGREES NOMINAL
key_chamfer_length0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
starting_edge_shapeCHAMFERED
NSN5315-00-317-4893
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6887674 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
STARTING EDGE SHAPE: CHAMFERED
•
KEY CHAMFER LENGTH: 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
KEY CHAMFER ANGLE45.0 DEGREES NOMINAL
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
STARTING EDGE SHAPECHAMFERED
KEY CHAMFER LENGTH0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6887674?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6887674?
6887674 is a KEY,MACHINE.
What is the NSN for 6887674?
6887674 is cataloged in the U.S. Government catalog under NSN 5315-00-317-4893. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6887674