PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 68855
68855 ✓ Verified by PartsTable
Unold · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Baking, grilling, rotisserie spit oven (28 litre) with burners.<br>- Outer housing insulated for energy saving.<br>- Continuously variable temperature adjustment.<br>- Top and bottom heating adjustable together or separately.<br>- With enamelled baking tray, chrome grill insert with rotisserie spit for chickens, etc.<br>- Suitable for baking forms up to Ø 28 cm.<br>- Burner 1,000 W with Ø19 cm, Burner 700 W with Ø15 cm.<br>- Indicator lamps.<br>- Grill insert, baking tray, rotisserie spit with holding clips, grate lifter, rotisserie spit lifter. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-990-8234, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
68855
NSN: 3110-00-990-8234
FSC: 3110
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
bore_diameter0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN
overall_width0.4280 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
alignment_typeRIGID
special_featuresOIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-990-8234
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 68855 · Unold ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
BORE DIAMETER: 0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE IN OUTER RING
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
BORE DIAMETER0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL WIDTH0.4280 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
8130869Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
1093398Interchangeable
interchangeable cross-reference
interchangeable
817-72Interchangeable
interchangeable cross-reference
interchangeable
ASTM F 2162Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 68855?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 68855?
68855 is a BEARING,ROLLER,NEEDLE manufactured by Unold.
What parts can replace 68855?
There are 32 known substitutes for 68855: 8130869, MS17131, A28229 and 29 more. Substitute compatibility should be verified for your specific system.
Is 68855 still available?
68855 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 68855

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026