PartsTable
Technical Data Sheet
Download PDF

6868B418006-101 — BEARING,ROLLER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

6868B418006-101: BEARING,ROLLER,THRUST.

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_diameter: 3.4000 INCHES MINIMUM AND 3.4030 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.4630 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: INSIDE RADIUS OF OUTER RING IS 0.1500 IN. MIN 0.1600 IN.

MAX IN. This part is cataloged in the U.S. Government catalog under NSN 3110-00-369-1902, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6868B418006-101
NSN: 3110-00-369-1902
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 13002 — GOODRICH CORPORATION DIV ADVANCED STRUCTURES LANDING SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_diameter3.4000 INCHES MINIMUM AND 3.4030 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.4630 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresINSIDE RADIUS OF OUTER RING IS 0.1500 IN. MIN 0.1600 IN. MAX IN
style_designatorFLAT RACE SURFACE, CYLINDRICAL ROLLERS
overall_outside_diameter4.0200 INCHES MINIMUM AND 4.0250 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
material_document_and_classification66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-369-1902
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6868B418006-101 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: FLAT RACE SURFACE, CYLINDRICAL ROLLERS
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 4.0200 INCHES MINIMUM AND 4.0250 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
OVERALL HEIGHT0.4630 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORFLAT RACE SURFACE, CYLINDRICAL ROLLERS
MATERIAL DOCUMENT AND CLASSIFICATION66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER4.0200 INCHES MINIMUM AND 4.0250 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESINSIDE RADIUS OF OUTER RING IS 0.1500 IN. MIN 0.1600 IN. MAX IN
BORE DIAMETER3.4000 INCHES MINIMUM AND 3.4030 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 3
1849A-57AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
68B418006Reference document
Same NSN cross-reference
Reference document — Secondary reference
68B418006-101Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 6868B418006-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6868B418006-101?
6868B418006-101 is a BEARING,ROLLER,THRUST.
What parts can replace 6868B418006-101?
There are 3 known substitutes for 6868B418006-101: 1849A-57A, 68B418006, 68B418006-101. Substitute compatibility should be verified for your specific system.
What is the NSN for 6868B418006-101?
6868B418006-101 is cataloged in the U.S. Government catalog under NSN 3110-00-369-1902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6868B418006-101