PartsTable
Technical Data Sheet
Download PDF

6862266 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6862266: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 347, first_leg_width: 1.440 INCHES NOMINAL IN, first_leg_length: 0.776 INCHES NOMINAL IN, second_leg_width: 1.695 INCHES NOMINAL IN, special_features: FURN W/NUT PLATE ON FIRST LEG,W/TWO SMALLER HOLES 0.096 IN. MIN,0.099 IN.

MAX DIA IN, style_designator: ANGLE. This part is cataloged in the U.S. Government catalog under NSN 5340-00-054-3140, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6862266
NSN: 5340-00-054-3140
FSC: 5340 — Hardware, Commercial
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 347
first_leg_width1.440 INCHES NOMINAL IN
first_leg_length0.776 INCHES NOMINAL IN
second_leg_width1.695 INCHES NOMINAL IN
special_featuresFURN W/NUT PLATE ON FIRST LEG,W/TWO SMALLER HOLES 0.096 IN. MIN,0.099 IN. MAX DIA IN
style_designatorANGLE
second_leg_length0.778 INCHES NOMINAL IN
first_leg_thickness0.039 INCHES NOMINAL IN
second_leg_thickness0.039 INCHES NOMINAL IN
first_leg_hole_diameter0.308 INCHES NOMINAL IN
second_leg_hole_diameter0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleONE HOLE
NSN5340-00-054-3140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6862266 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.320 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.308 INCHES NOMINAL IN
•
SECOND LEG HOLE DIAMETER: 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.695 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.778 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.720 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.320 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.308 INCHES NOMINAL IN
SECOND LEG HOLE DIAMETER0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
SECOND LEG WIDTH1.695 INCHES NOMINAL IN
SECOND LEG LENGTH0.778 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.720 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5512 ASSN STD SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.039 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6862266?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6862266?
6862266 is a BRACKET,ANGLE.
What is the NSN for 6862266?
6862266 is cataloged in the U.S. Government catalog under NSN 5340-00-054-3140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6862266

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.