PartsTable
Technical Data Sheet
Download PDF

6860997 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

6860997: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.250 INCHES NOMINAL IN, thread_length: 0.253 INCHES MINIMUM IN, screw_material: IRON ALLOY 660, fastener_length: 0.387 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-871-8259, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6860997
NSN: 5305-00-871-8259
FSC: 5305 — Screws
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.250 INCHES NOMINAL IN
thread_length0.253 INCHES MINIMUM IN
screw_materialIRON ALLOY 660
fastener_length0.387 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentSILVER
thread_quantity_per_inch36
NSN5305-00-871-8259
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 6860997 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: SILVER
•
FASTENER LENGTH: 0.387 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.253 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: IRON ALLOY 660
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTSILVER
FASTENER LENGTH0.387 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.253 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALIRON ALLOY 660
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6860997?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6860997?
6860997 is a SCREW,MACHINE.
What is the NSN for 6860997?
6860997 is cataloged in the U.S. Government catalog under NSN 5305-00-871-8259. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6860997