PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 68604
68604 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include phase: THREE INPUT, diameter: 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN, material: RUBBER SYNTHETIC CUSHION, duty_cycle: CONTINUOUS, winding_type: INDUCTION-SQUIRREL CAGE, overall_width: 11.330 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-144-6094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
68604
NSN: 5340-00-144-6094
FSC: 5340
CAGE: 80254 — TEXTRON LYCOMING INC WILLIAMSPORT PLANT (USA)
SPECIFICATIONS
phaseTHREE INPUT
diameter0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
materialRUBBER SYNTHETIC CUSHION
duty_cycleCONTINUOUS
winding_typeINDUCTION-SQUIRREL CAGE
overall_width11.330 INCHES IN
cooling_methodSEPARATELY VENTILATED
overall_height10.080 INCHES IN
overall_length11.236 INCHES IN
shaft_diameter0.6640 INCHES NOMINAL SINGLE END IN
mounting_methodFIXED BASE
shaft_end_styleSPLINED SINGLE END
NSN5340-00-144-6094
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 68604 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
SURFACE TREATMENT: CADMIUM BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.930 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.650 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC CUSHION
MATERIALALUMINUM ALLOY OR STEEL BAND
SURFACE TREATMENTCADMIUM BAND
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END0.930 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.650 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
D2500Interchangeable
interchangeable cross-reference
interchangeable
D2500-1Interchangeable
interchangeable cross-reference
interchangeable
68604Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 68604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 68604?
68604 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 68604?
There are 3 known substitutes for 68604: D2500, D2500-1, 68604. Substitute compatibility should be verified for your specific system.
What is the NSN for 68604?
68604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-144-6094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 68604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026