PartsTable
Technical Data Sheet

6836LPDH5/L16 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6836LPDH5/L16: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SPRING, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, construction: SOLID, housing_bore_diameter: 2.250 INCHES NOMINAL IN, accommodated_shaft_diameter: 1.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-448-7374, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6836LPDH5/L16
NSN: 5330-00-448-7374
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SPRING
seal_width0.375 INCHES NOMINAL IN
temp_rating-20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
constructionSOLID
housing_bore_diameter2.250 INCHES NOMINAL IN
accommodated_shaft_diameter1.562 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-448-7374
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6836LPDH5/L16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 1.562 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
TEMP RATING-20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEAL WIDTH0.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER1.562 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING SPRING
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 4
6836LAH1L7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6836LPDReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6836LPDH1L7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
331930Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6836LPDH5/L16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6836LPDH5/L16?
6836LPDH5/L16 is a SEAL,PLAIN.
What parts can replace 6836LPDH5/L16?
There are 4 known substitutes for 6836LPDH5/L16: 6836LAH1L7, 6836LPD, 6836LPDH1L7 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6836LPDH5/L16?
6836LPDH5/L16 is cataloged in the U.S. Government catalog under NSN 5330-00-448-7374. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6836LPDH5/L16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.