PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6823492-12
6823492-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 6823492-12 is a the manufacturer industrial component. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 0.550 INCHES NOMINAL IN, inside_diameter_length: 0.880 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-826-0423, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6823492-12
NSN: 5340-00-826-0423
FSC: 5340
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter0.550 INCHES NOMINAL IN
inside_diameter_length0.880 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.500 INCHES NOMINAL IN
NSN5340-00-826-0423
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6823492-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.880 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.550 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.500 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.880 INCHES NOMINAL IN
OVERALL DIAMETER0.550 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.500 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
RS1Upgraded Successor
successor cross-reference
successor
1.0SCUpgraded Successor
successor cross-reference
successor
GCT1.0Upgraded Successor
successor cross-reference
successor
6823492-12Interchangeable
interchangeable cross-reference
interchangeable
10609 1-2SCInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6823492-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6823492-12?
6823492-12 is a 6823492-12.
What parts can replace 6823492-12?
There are 5 known substitutes for 6823492-12: RS1, 1.0SC, GCT1.0 and 2 more. Substitute compatibility should be verified for your specific system.
Is 6823492-12 still available?
6823492-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6823492-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026