PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6800-02
6800-02 ✓ Verified by PartsTable
Intellinet · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Covers unused positions in the cabinets<br>- 2U<br>- 19"<br>- Material: Sheet steel. Key specifications include special_features: STERILE; INDIVIDUAL PACKAGE; DISPOSABLE, part_name_assigned_by_controlling_agency: INTRAVENOUS INJECTION SET 72" TUBING 10CC SYR STERILE DISP 5S. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-596-7231, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6800-02
NSN: 5340-00-596-7231
FSC: 5340
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
special_featuresSTERILE; INDIVIDUAL PACKAGE; DISPOSABLE
nonsupply_items_and_quantities72 INCH TUBING,1; IV ADMINISTRATION SPIKE,1; INLINE SENSOR HOUSING,1; 3-WAY STOPCOCK,1; 10 CC CONTROL SYRINGE,1; LUER LOCK PROTECTIVE COVERS,2 IN
part_name_assigned_by_controlling_agencyINTRAVENOUS INJECTION SET 72" TUBING 10CC SYR STERILE DISP 5S
NSN5340-00-596-7231
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6800-02 MFR: Intellinet ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN CUP FLATS: 0.438 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-640, COMP FS1009-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: CADMIUM
•
MATERIAL: STEEL COMP 1009
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.500 INCHES NOMINAL IN
WIDTH BETWEEN CUP FLATS0.438 INCHES NOMINAL IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-640, COMP FS1009-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENTCADMIUM
MATERIALSTEEL COMP 1009
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.688 INCHES NOMINAL IN
OVERALL HEIGHT0.172 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.344 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
SP 4572Upgraded Successor
successor cross-reference
successor
680002Upgraded Successor
successor cross-reference
successor
74-00800-8004Interchangeable
interchangeable cross-reference
interchangeable
MS16562-194Interchangeable
interchangeable cross-reference
interchangeable
24119-2Interchangeable
interchangeable cross-reference
interchangeable
9M1563Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6800-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6800-02?
6800-02 is a RETAINER,NUT AND BOLT manufactured by Intellinet.
What parts can replace 6800-02?
There are 10 known substitutes for 6800-02: SP 4572, 680002, 74-00800-8004 and 7 more. Substitute compatibility should be verified for your specific system.
Is 6800-02 still available?
6800-02 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6800-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026