PartsTable
Technical Data Sheet
Download PDF

680-3 — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
3M · MRO · MRO_GENERAL
PRODUCT OVERVIEW

680-3: FILTER,RADIO FREQUENCY INTERFERE.

Use these green flags to highlight, mark, tab important points in a textbook or document. Flags stick securely and remove cleanly. 50 green flags per dispenser.

Key specifications include overall_depth: 37.8 MILLIMETERS NOMINAL MM, overall_width: 52.2 MILLIMETERS NOMINAL MM, overall_height: 18.1 MILLIMETERS NOMINAL MM, supplementary_features: MEASURE ANATOMICAL,ORIENTATION ANGLES,LINEAR ACCELERATION, part_name_assigned_by_controlling_agency: WEARABLE 3D MOTION CAPTURE. This part is cataloged in the U.S. Government catalog under NSN 5305-00-010-2592, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 680-3
NSN: 5305-00-010-2592
NIINs: 000102592, 000365690, 002367218, 003031151, 003759824, 005073830, 007390961, 007998966, 008919343, 010393741, 010431958, 013152020, 014221686, 015434173, 016945459
FSC: 5305 — Screws
CAGE: 56697 — STANDARD FORGE AND AXLE CO INC (USA)
SPECIFICATIONS
overall_depth37.8 MILLIMETERS NOMINAL MM
overall_width52.2 MILLIMETERS NOMINAL MM
overall_height18.1 MILLIMETERS NOMINAL MM
supplementary_featuresMEASURE ANATOMICAL,ORIENTATION ANGLES,LINEAR ACCELERATION
part_name_assigned_by_controlling_agencyWEARABLE 3D MOTION CAPTURE
NSN5305-00-010-2592
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 680-3 · 3M ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.375 INCHES MAXIMUM IN
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: CUP
•
INTERNAL DRIVE STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
THREAD LENGTH0.375 INCHES MAXIMUM IN
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
THREAD DIRECTIONRIGHT-HAND
POINT STYLECUP
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
THREAD QUANTITY PER INCH16
SUBSTITUTES & CROSS-REFERENCES 5
102592Reference document
Same NSN cross-reference
Reference document — Secondary reference
0902870Reference document
Same NSN cross-reference
Reference document — Secondary reference
902870Reference document
Same NSN cross-reference
Reference document — Secondary reference
0902870-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
380755006Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 680-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 680-3?
680-3 is a FILTER,RADIO FREQUENCY INTERFERE manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 680-3?
There are 5 known substitutes for 680-3: 102592, 0902870, 902870 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 680-3?
680-3 is cataloged in the U.S. Government catalog under NSN 5305-00-010-2592. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 680-3