68-01-4200AW — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

68-01-4200AW: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, thread_class: 3A A, chamfer_angle: 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM, head_diameter: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-735-6330, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

68-01-4200AW

NSN: 5305-01-735-6330
FSC: 5305 — Screws
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLAT CHAMFER
head_height	0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_class	3A A
chamfer_angle	30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
head_diameter	0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_length	1.500 INCHES NOMINAL IN
fastener_length	2.19 INCHES MINIMUM AND 2.25 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	BLACK OXIDE OVERALL
width_across_flats	0.375 INCHES NOMINAL IN
internal_drive_style	HEXAGON
NSN	5305-01-735-6330

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN

•

FASTENER LENGTH: 2.19 INCHES MINIMUM AND 2.25 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-DTL-13924, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 1.500 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 0.5000 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.375 INCHES NOMINAL IN
HEAD HEIGHT	0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH	2.19 INCHES MINIMUM AND 2.25 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-DTL-13924, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	1.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.5000 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1352 NATIONAL STD/SPEC

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 2

ERH413-1602B115-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

NAS1352Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 68-01-4200AW?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 68-01-4200AW?

68-01-4200AW is a SCREW,CAP,SOCKET HEAD.

What parts can replace 68-01-4200AW?

There are 2 known substitutes for 68-01-4200AW: ERH413-1602B115-1, NAS1352. Substitute compatibility should be verified for your specific system.

What is the NSN for 68-01-4200AW?

68-01-4200AW is cataloged in the U.S. Government catalog under NSN 5305-01-735-6330. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

68-01-4200AW — SCREW,CAP,SOCKET HEAD

Request a Quote — 68-01-4200AW