PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 67C35426
67C35426 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, chamfer_length: 0.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 20.875 INCHES NOMINAL IN, overall_diameter: 1.000 INCHES NOMINAL IN, special_features: ONE GROOVE 0.046 INCH WIDE,0.030 INCH DEEP,2.125 INCHES FROM EACH END IN, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-245-1898, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
67C35426
NSN: 5340-00-245-1898
FSC: 5340
CAGE: 98750 — SAN ANTONIO AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
chamfer_length0.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length20.875 INCHES NOMINAL IN
overall_diameter1.000 INCHES NOMINAL IN
special_featuresONE GROOVE 0.046 INCH WIDE,0.030 INCH DEEP,2.125 INCHES FROM EACH END IN
surface_treatmentCADMIUM OVERALL
NSN5340-00-245-1898
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 67C35426 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OVERALL DIAMETER1.000 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
CHAMFER LENGTH0.062 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH20.875 INCHES NOMINAL IN
SPECIAL FEATURESONE GROOVE 0.046 INCH WIDE,0.030 INCH DEEP,2.125 INCHES FROM EACH END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6CAC540Interchangeable
interchangeable cross-reference
interchangeable
AC540Interchangeable
interchangeable cross-reference
interchangeable
A3-25118Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 67C35426?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67C35426?
67C35426 is a ROD,STRAIGHT,HEADLESS.
What parts can replace 67C35426?
There are 3 known substitutes for 67C35426: 6CAC540, AC540, A3-25118. Substitute compatibility should be verified for your specific system.
What is the NSN for 67C35426?
67C35426 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-245-1898. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67C35426

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026