PartsTable
Technical Data Sheet
Download PDF

67A248J1PC18 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

67A248J1PC18: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 3130 OVERALL, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, surface_treatment: CADMIUM AND CHROMATE OVERALL, pin_overall_length: 4.440 INCHES NOMINAL IN, first_hole_diameter: 0.140 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-224-9398, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
67A248J1PC18
NSN: 5315-00-224-9398
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 3130 OVERALL
surface_finish125.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
surface_treatmentCADMIUM AND CHROMATE OVERALL
pin_overall_length4.440 INCHES NOMINAL IN
first_hole_diameter0.140 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
pin_overall_diameter0.4930 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM IN
second_hole_diameter0.140 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.060 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
material_document_and_classificationMIL-S-6758 COMD D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-224-9398
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 67A248J1PC18 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 COMD D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.140 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 COMD D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.4930 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM IN
PIN OVERALL LENGTH4.440 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
67A248JPC18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 67A248J1PC18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67A248J1PC18?
67A248J1PC18 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 67A248J1PC18?
There is 1 known substitute for 67A248J1PC18: 67A248JPC18. Substitute compatibility should be verified for your specific system.
What is the NSN for 67A248J1PC18?
67A248J1PC18 is cataloged in the U.S. Government catalog under NSN 5315-00-224-9398. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67A248J1PC18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.