PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 67892
67892 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include material: COPPER, special_features: REIDSVILLE HYDRAULICS INC MOTOR MODEL SIZE35, cross-sectional_shape_style: PLAIN ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-2786, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
67892
NSN: 5340-00-598-2786
FSC: 5340
CAGE: 06004 — STEWART-WARNER BASSICK CORP (USA)
SPECIFICATIONS
materialCOPPER
special_featuresREIDSVILLE HYDRAULICS INC MOTOR MODEL SIZE35
cross-sectional_shape_stylePLAIN ROUND
NSN5340-00-598-2786
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 67892 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WHEEL QUANTITY: 1
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.938 INCHES NOMINAL IN
•
CASTER PLATE LENGTH: 6.500 INCHES NOMINAL IN
•
CASTER PLATE MOUNTING HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
MATERIAL: FIBER AND RUBBER TREAD
•
SURFACE TREATMENT: ZINC PLATE
•
STYLE DESIGNATOR: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
WHEEL QUANTITY1
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.938 INCHES NOMINAL IN
CASTER PLATE LENGTH6.500 INCHES NOMINAL IN
CASTER PLATE MOUNTING HOLE DIAMETER0.562 INCHES NOMINAL IN
MATERIALFIBER AND RUBBER TREAD
SURFACE TREATMENTZINC PLATE
MATERIALIRON CAST AND STEEL PLATE
STYLE DESIGNATORRIGID
MATERIALIRON CAST AND STEEL BODY
SURFACE TREATMENTZINC BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
81432Interchangeable
interchangeable cross-reference
interchangeable
WT-81432-WInterchangeable
interchangeable cross-reference
interchangeable
60R8-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 67892?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67892?
67892 is a COVER,ELECTRICAL CONNECTOR.
What parts can replace 67892?
There are 3 known substitutes for 67892: 81432, WT-81432-W, 60R8-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 67892?
67892 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-2786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67892

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026