- ZM-OP1 is comprised of a 80mm slim fan and a fan grill. It can be attached without using a supporting bracket. - By attaching the noiseless fan ZM-OP1, ZM80C-HP's cooling performance is greatly enhanced.
This part is cataloged in the U.S. Government catalog under NSN 5305-00-488-4362, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→67715
NSN:5305-00-488-4362 NIINs:004884362, 009611808, 009893377, 016848370 FSC:5305 — Screws CAGE:93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
material
STEEL COMP 303 OR STEEL COMP 303SE OVERALL
head_style
HEADLESS (SETSCREW)HEADLESS (SETSCREW)
point_style
DOGDOG
point_length
0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
thread_class
3A3A
thread_length
1.020 INCHES MINIMUM1.020 INCHES MINIMUM IN
overall_length
30.50 MILLIMETERS NOMINAL MM
point_diameter
0.115 INCHES MINIMUM AND 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
fastener_length
1.120 INCHES NOMINAL1.120 INCHES NOMINAL IN
overall_diameter
31.00 MILLIMETERS MAXIMUM MM
special_features
LARGE MAXIMUM APERTURE; LOW LENS-TO-LENS VARIATION
thread_direction
RIGHT-HANDRIGHT-HAND
NSN
5305-00-488-4362
COMPONENT DIAGRAM
KEY FEATURES
•
POINT DIAMETER: 0.115 INCHES MINIMUM AND 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL IN
•
POINT LENGTH: 0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.120 INCHES NOMINAL1.120 INCHES NOMINAL IN
•
THREAD LENGTH: 1.020 INCHES MINIMUM1.020 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HANDRIGHT-HAND
TECHNICAL CHARACTERISTICS
POINT DIAMETER
0.115 INCHES MINIMUM AND 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
WIDTH ACROSS FLATS
0.188 INCHES NOMINAL IN
POINT LENGTH
0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
FASTENER LENGTH
1.120 INCHES NOMINAL1.120 INCHES NOMINAL IN
THREAD LENGTH
1.020 INCHES MINIMUM1.020 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER
0.375 INCHES IN
HEAD STYLE
HEADLESS (SETSCREW)HEADLESS (SETSCREW)
THREAD DIRECTION
RIGHT-HANDRIGHT-HAND
POINT STYLE
DOGDOG
SPECIAL FEATURES
TWO DRILLED HOLES IN SOCKET END 0.047 IN. DIA AND 0.094 IN. FROM BOLT ENDTWO DRILLED HOLES IN SOCKET END 0.047 IN. DIA AND 0.094 IN. FROM BOLT END IN
SUBSTITUTES & CROSS-REFERENCES
No substitute or cross-reference records for this part.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67715?
67715 is a ELBOW ASSEMBLY manufactured by Zalman. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 67715?
67715 is cataloged in the U.S. Government catalog under NSN 5305-00-488-4362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.