676921-3 — BRACKET,ANGLE

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

676921-3: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 46.250 INCHES NOMINAL IN, first_leg_length: 0.625 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-053-4385, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

676921-3

NSN: 5340-01-053-4385
FSC: 5340 — Hardware, Commercial
CAGE: 20418 — DRS SUSTAINMENT SYSTEMS, INC. (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 6061
first_leg_angle	90.0 DEGREES NOMINAL
first_leg_style	SQUARE
first_leg_width	46.250 INCHES NOMINAL IN
first_leg_length	0.625 INCHES NOMINAL IN
second_leg_style	SQUARE
second_leg_width	46.250 INCHES NOMINAL IN
special_features	THE HOLES IN LEG 2 ARE IN 3 SETS
style_designator	ANGLE
second_leg_length	0.875 INCHES NOMINAL IN
first_leg_thickness	0.220 INCHES NOMINAL IN
second_leg_thickness	0.220 INCHES NOMINAL IN
NSN	5340-01-053-4385

COMPONENT DIAGRAM

KEY FEATURES

•

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN

•

FIRST LEG ANGLE: 90.0 DEGREES NOMINAL

•

SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL

•

SECOND LEG HOLE DIAMETER: 0.220 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN

•

SECOND LEG WIDTH: 46.250 INCHES NOMINAL IN

•

SECOND LEG LENGTH: 0.875 INCHES NOMINAL IN

•

FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE

•

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.500 INCHES NOMINAL IN
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN
SECOND LEG WIDTH	46.250 INCHES NOMINAL IN
SECOND LEG LENGTH	0.875 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE	NO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM IN
STYLE DESIGNATOR	ANGLE
FIRST LEG STYLE	SQUARE

SUBSTITUTES & CROSS-REFERENCES 2

12266352-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

12266352Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 676921-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 676921-3?

676921-3 is a BRACKET,ANGLE.

What parts can replace 676921-3?

There are 2 known substitutes for 676921-3: 12266352-3, 12266352. Substitute compatibility should be verified for your specific system.

What is the NSN for 676921-3?

676921-3 is cataloged in the U.S. Government catalog under NSN 5340-01-053-4385. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

676921-3 — BRACKET,ANGLE

Request a Quote — 676921-3